In order to build your own DiveIno, you have to go through the following steps:

DiveIno PCB or Shield

1. Order the required parts
2. 3D print the on/off switch and the pressure sensor cases
3. Fabricate the PCB
4. Assemble the Watertight case
5. Assemble your DiveIno - see the PCB or Arduino Shield versions
6. Upload the latest software onto your DiveIno
7. Read the User Guide
8. Dry test your DiveIno
9. Go diving!

Legacy DiveIno

1. Check the required DiveIno parts
2. Calculate the expected cost
3. Order the parts!
4. Assemble the Watertight case
5. Assemble the Screen and microcontroller module
6. Assemble the Sensor module
7. Assemble the Power module
8. Upload the latest software onto your DiveIno
9. Connect all modules with each other
10. Read the User Guide
11. Go diving!